HFZL40 Long Screw Piling Machine
- Borehole Diameter: 1200mm
- Maximum Drilling Depth: 42m
- Walking Speed: 3.9m/min
- Drilling Rotary Speed: ≤21r/min
We're here to help:Easy ways to get the answers you need.
HFZL40 crawler type long auger rig with rigid frame, the upper operating mechanism with three-point structure, the bottom of the column using cross-axis structure connection. The built-in hydraulic system, in addition to four legs using hydraulic transmission, the rest are used mechanical transmission, rotary mechanism with two rotary deceleration. Rotation speed adjustable, pile frame rotation smoothly. The main winch uses variable frequency to control the rope speed. Electrical control of the use of centralized control. This machine configuration high-power variable frequency power head, in a certain range can be stepless speed, the power head is equipped with two kinds of reducer, one for the three-ring reducer, one for the planetary reducer.
HFL40 track long auger drilling the largest drilling diameter of 1.05 meter, the deepest drilling 42 meters, is currently the largest and deepest long auger.
HFL40 crawler-type long auger rig with crawler walking, with mobile flexibility in place quickly, operating safety and other advantages, greatly reducing the construction assistance time, the drilling machine into the hole of good quality, high efficiency, easy to operate no noise pollution, high degree of mechanization, Therefore, widely used in industrial and civil construction of the pile foundation construction, especially for urban construction with the construction of the pile of mechanized construction.
At Working Site：
In Luoyang work site
|Column support way||Three points|
|Crawler chassis width||7m|
|Max pulling torque||900kn|
|Drilling diameter||1200mm max|
|Drilling depth||42m max|
|Crawler chassis touch ground distance||6m|
|Column lean range||Front 11 degree, back 3 degree|
|Crawler ability||2 degree|
|Drilling rotary speed||≤21r/min|
|10 ton main winch lifting speed (adjustable)||0-23m/min|
|3 ton main vice lifting speed (adjustable)||12m/min|
|Rotary angle||+/-180 degree|
|Diagonal line adjustment speed||0.44m/min|
|Pressure of touch ground||Without working equipment||Support leg||0.29Mpa|
|Total weight (not including the rotary head)||107x10³KG|
|Column guide central distance||700*dia102 330*dia70|
get in touch
If you have any questions, please fill in the following information and we will respond to you in time.